Avaya P550R Manual Do Utilizador

                   3

610-0184-095

June 14, 2001

■

Relay Agent Information option (option 82) for Dynamic 
Host Configuration Protocol (DHCP). When forwarding 
client-originated DHCP packets to a DHCP server, the Cajun 
switch inserts this option, which contains information about 
the switch. The DHCP server uses this information to 
authenticate the client. 

For information on how to enable option 82, see 

of this document. 

■

Enhancement of the MAC Address Lock feature. This feature 
has been available in all previous releases. If a source MAC 
address is locked at a port (statically configured), a frame 
with that source MAC will be filtered if received on any other 
port on the same VLAN. With the enhancement, the feature 
immediately generates traps to identify all unknown source 
addresses. If, after sending a trap for an unknown source, the 
switch continues to receive traffic from the source, the 
feature generates a trap every 30 minutes until the traffic 
stops. 

* Note:  You can set the trap timer within a range of 60 to 

1800 seconds (default) in one second intervals.

For information on how to enable the MAC Address Lock 
feature and traps for unknown source addresses, see 

of this document.

■

Load MIB for the ATM Uplink module, v1.1. This feature 
makes it possible for you to use SNMP commands to: 

Upload the startup configuration file of the ATM Uplink 
module to a TFTP server

Download the startup configuration file from a TFTP 
server to the ATM Uplink module. 

Download a software image to the ATM Uplink module.