Renesas M30240T-RPD-E Manual Do Utilizador
( 36 / 58 )
Chapter 4. Usage
4.1 Turning On the Power
(1) Checking the Connection of the Emulator System
Before turning the power ON, check the connection of the PC4701, emulation pod, converter board
and target system.
and target system.
(2) Turning On the Power
Power ON/OFF the target system and the PC4701 as simultaneously as possible. If there is a time lag
when powering on, follow the order below. However, the order for shutting OFF the power is (2) - (1).
when powering on, follow the order below. However, the order for shutting OFF the power is (2) - (1).
(1) Turning on the power of the target system.
(2) Turning on the power of the PC4701.
(2) Turning on the power of the PC4701.
CAUTION
Notes on Power Supply:
• The emulator's V
CC
pin is connected to the target system in order to monitor target
system voltage. For this reason, the emulator cannot supply power to the target
system. Therefore, provide the target system with a separate power supply from that
of the emulator.
system. Therefore, provide the target system with a separate power supply from that
of the emulator.
• Keep target system power supply voltage within the range of +4.75 to +5.25V.
• Do not change target system power supply voltage after power has been activated.