DELL N3000 Manual Do Utilizador
Configuring SNMP
355
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Version 3 notifications
System Contact:
System Location:
Configuring SNMPv3
This example shows how to complete a basic SNMPv3 configuration. The
commands create a view that includes objects from the
internet MIB subtree
(OID 1.3.6.1), which includes all objects on the switch.
The user named
The user named
admin has read-write privileges to all objects within the view
(in other words, all objects on the switch) after supplying the appropriate
authentication credentials (secretkey).
To configure the switch:
To configure the switch:
1 Configure the view.
view_snmpv3 and specify the objects to include.
console#configure
console(config)#snmp-server view view_snmpv3
internet included
2 Create the group
group_snmpv3 and allow read-write access to the view
configured in the previous step.
console(config)#snmp-server group group_snmpv3 v3
auth read view_snmpv3 write view_snmpv3
Community-String
Group Name
IP Address
-----------------
--------------
------------
private
DefaultWrite
All
public
DefaultRead
All
Target Addr. Type
Community
Version UDP
Port
Filter
Name
TO
Sec
Retries
------------ ----
---------
----
----- -----
---
-------
192.168.3.65 Trap
public
1
162
Target Addr. Type
Username
Security
Level
UDP
Port
Filter
Name
TO
Sec
Retries
------------ ----
---------
-------
----- -----
---
-------