DELL N3000 Manual Do Utilizador

Switch Feature Overview

Dell Networking series switches provide IPv6 support for many standard 

management features including HTTP, HTTPS/SSL, Telnet, SSH, SNMP, 

SNTP, TFTP, and traceroute on both the in-band and out-of-band 

management ports.

Dell Networking series switches can store up to two software images. The dual 

image feature allows you to upgrade the switch without deleting the older 

software image. You designate one image as the active image and the other 

image as the backup image.
For information about managing the switch image, see "Managing Images 

You can upload and download files such as configuration files and system 

images by using HTTP (web only), TFTP, Secure FTP (SFTP), or Secure 

Copy (SCP). Configuration file uploads from the switch to a server are a good 

way to back up the switch configuration. You can also download a 

configuration file from a server to the switch to restore the switch to the 

configuration in the downloaded file.
You can also copy files to and from a USB Flash drive that is plugged into the 

USB port on the front panel of the switch or automatically upgrade a switch 

by booting it with a newer firmware image on a USB drive plugged in to the 

switch.
For information about uploading, downloading, and copying files, see 

Switch Database Management (SDM) templates enable you to reallocate 

system resources to support a different mix of features based on your network 

requirements. Dell Networking series switches support the following three 

templates:

• Dual IPv4 and IPv6 (default)
• IPv4  Routing