Cabletron Systems 2E43-27 Manual Do Utilizador

SET ALL PORTS (Toggle)

All ports (1 through 24) can be set at once to either STANDARD or 
FULL from this field. To set ports, refer to 

.

[1-12] or [13-24] (Navigation Key)

When the Full Duplex Configuration screen displays, the current 
operation mode and status information are displayed for the first 12 ports. 
This field allows the user to step to the second screen for the same type of 
information for ports 13 through 24. While on the second screen, the user 
can navigate back to the first screen by highlighting the 

[1-12] field and 

pressing ENTER

. The user can change the Operation Mode fields while in 

either the first or second screen.

The Operational Mode may be set to Standard Ethernet or Full Duplex 
either one port at a time or all at once. The following steps describe 
setting the port Operational Mode for individual ports followed by steps 
to set the Operational Mode for all ports.

To set the Operational Mode for individual ports, proceed as follows:

Use the arrow keys to highlight the Operation Mode field adjacent to 
the number of the port(s) that you plan to change.

Press the SPACE bar until the appropriate mode, FULL DUPLEX or 
STANDARD ENET displays in the field.

Use the arrow keys to highlight the SAVE command on the bottom 
line of the screen.

Press ENTER. The message “SAVED OK” displays. 

The Operation Mode for

 

the first 12 ports can be changed on 

the first screen. To display the Operation Mode for Ports 13 
through 24, use the arrow keys to highlight the Ports [13-24] 
field and press ENTER. To again display the Operation Mode 
for Ports 1 through 12, use the arrow keys to highlight the Ports 
[1-12] field and press ENTER.