Cabletron Systems 2E43-27 Manual Do Utilizador

Chapter 5: Local Management

NVRAM Installed (Read-only)

Indicates the amount of NVRAM installed in the 2E4X-27 and how much 
of it is currently available.

Current Switch Utilization (Read-only)

Shows how much (percentage of processor capacity) of the 2E4X-27 is 
currently being used.

Peak Switch Utilization (Read-only)

Shows the peak percentage of maximum switching capacity, since last 
reset.

Reset Peak Switch Utilization (Toggle)

Allows the user to reset the Peak Switch Utilization field. The switch may 
be set to either YES or NO as described in 

. YES resets the 

Peak Switch Utilization field to the current system traffic.

To set the Reset Peak Switch Utilization field to YES or NO, proceed as 
follows:

Use the arrow keys to highlight the Peak Switch Utilization field.

Press the SPACE bar to select YES or NO.

Use the arrows keys to highlight the SAVE command at the bottom of 
the screen.

Press ENTER. The message “SAVED OK” displays.

The High Speed Interface Configuration Menu screen, 

, 

applies to the Fast Ethernet Interface Modules and the High Speed 
Interface Module. 

This High Speed Interface Configuration Menu screen does not 
display unless an optional interface module is installed: one or 
two Fast Ethernet Interface Modules, or High Speed Interface 
Module (HSIM).