Manualsbrain.com
  1. Manuais
  2. Marcas
  3. TP-LINK
  4. TL-SG2216
  5. Ficha De Dados

TP-LINK TL-SG2216 Ficha De Dados

Download
Página de 182
 
71
 
Syntax 
speed { 10 | 100 | 1000 | auto } 
no speed 
Parameter   
10 | 100 | 1000 | auto —— The speed mode of the Ethernet port. There are 
four options: 10Mbps, 100Mbps, 1000Mbps and Auto negotiation mode 
(default). 
Command Mode 
Interface Configuration Mode (interface gigabitEthernet / interface range 
gigabitEthernet) 
Example 
Configure the Speed Mode as 100Mbps for port 3:     
TL-SG2424(config)# interface gigabitEthernet 1/0/3 
TL-SG2424(config-if)# speed 100 
storm-control broadcast 
Description 
The storm-control broadcast command is used to enable the broadcast 
control function. To disable the broadcast control function, please use no 
storm-control broadcast command. Broadcast control function allows the 
switch to filter broadcast in the network. If the transmission rate of the broadcast 
packets exceeds the set bandwidth, the packets will be automatically discarded 
to avoid network broadcast storm. 
Syntax 
storm-control broadcast [rate rate] 
no storm-control broadcast   
Parameter 
rate  —— Specify the bandwidth for receiving broadcast packets on the port. 
The packet traffic exceeding the bandwidth will be discarded. The value of it can 
be 128k | 256k| 512k|1m | 2m | 4m | 5m | 10m | 20m | 40m | 50m in bps. By 
default, the value is “128K”. 
Command Mode 
Interface Configuration Mode (interface gigabitEthernet / interface range 
gigabitEthernet)