Q-Logic 5802V Manual Do Utilizador
14 – Command Reference
Ipsec Policy
59263-01 A
14-53
A
Ipsec Policy
Manages policies in the Security Policy database.
Authority
Admin session and an Ipsec Edit session
Syntax
ipsec policy
copy [policy_source] [policy_destination]
create [policy]
delete [policy]
edit [policy]
list [option]
rename [policy_old] [policy_new]
create [policy]
delete [policy]
edit [policy]
list [option]
rename [policy_old] [policy_new]
Keywords
copy [policy_source] [policy_destination]
Creates a new policy named [policy_destination] and copies the configuration into
it from the policy given by [policy_source]. You must enter the Ipsec Save
command afterwards to save your changes. [policy_destination] must not begin
with DynamicSP_, which is reserved for dynamic policies.
it from the policy given by [policy_source]. You must enter the Ipsec Save
command afterwards to save your changes. [policy_destination] must not begin
with DynamicSP_, which is reserved for dynamic policies.
create [policy]
Creates a policy with the name given by [policy]. A policy name must begin with a
letter and be no longer than 32 characters. Valid characters are 0-9, A-Z, a-z, _, $,
^, and -. The Security Policy database supports a maximum of 128 user-defined
policies. You must enter the Ipsec Save command afterwards to save your
changes.
letter and be no longer than 32 characters. Valid characters are 0-9, A-Z, a-z, _, $,
^, and -. The Security Policy database supports a maximum of 128 user-defined
policies. You must enter the Ipsec Save command afterwards to save your
changes.
describes the policy parameters:
Table 14-7. Policy Configuration Parameters
Parameter
Description
Description
Description of the policy
SourceAddress
IP address (version 4 or 6) or DNS host name of the host,
switch, or gateway from which data originates.
switch, or gateway from which data originates.
SourcePort
Source port number (1–65535)
DestinationAddress
IP address (version 4 or 6) or DNS host name of the host,
switch, or gateway receiving data. If you specified an IP address
for the SourceAddress, the DestinationAddress must use the
same IP version format.
switch, or gateway receiving data. If you specified an IP address
for the SourceAddress, the DestinationAddress must use the
same IP version format.
DestinationPort
Destination port number (1–65535)