Cabletron Systems 2H33-37R Manual Do Utilizador

Chapter 5: Local Management

The Switch Configuration screen, 

, provides the basic setup 

options to make a switch operational in your network.

To access the Switch Configuration screen from the Device Configuration 
Menu screen, use the arrow keys to highlight the SWITCH 
CONFIGURATION menu item and press ENTER. The Switch 
Configuration screen displays up to 8 ports. To view or edit the fields for 
other ports, highlight NEXT at the bottom of the screen and press 
ENTER.

Depending on the optional interfaces installed and if the device is a 
2H23-50R or 2H33-37R, there can be 10 or 7 ports, respectively. As 
shown in 

, there are two network ports per RJ21 CONN 

connector.

The Switch Configuration screen is not available if the 
operational mode of the device is set to SECURE FAST VLAN. 
This screen may only be used when the device is configured to 
operate as an 802.1D or 802.1Q switch.

CONN 1 = Network Port 1, 10 Mbps

Network Port 2, 100 Mbps

CONN 1 = Network Port 1, 10 Mbps

Network Port 2, 100 Mbps

CONN 2 = Network Port 3, 10 Mbps

Network Port 4, 100 Mbps

CONN 2 = Network Port 3, 10 Mbps

Network Port 4, 100 Mbps

CONN 3 = Network Port 5, 10 Mbps

Network Port 6, 100 Mbps

CONN 3 = Network Port 5, 10 Mbps

Network Port 6, 100 Mbps

CONN 4 = Network Port 7, 10 Mbps

Network Port 8, 100 Mbps

HSIM = Port 7

Fast Ethernet Slot 5 = Port 9

Fast Ethernet Slot 6 = Port 10