Tektronix 2200 Manual Do Utilizador

2-35

The Framestore stores up to eight fields of video which can be reentered 
into the switcher or sent to the output of the switcher. several special effects 
can be done to the stored video. The Framestore installs in slot A17. If the 
Aux Control Module is installed in A17, that module must be removed and 
the Framestore installed. The Framestore has all of the circuits required to 
operate the Timed Aux Output Modules. 

The Remote Aux Control Panel Option allows you to control the Model 
2200’s Aux Buses from a remote location. As many as 32 Remote Aux 
Panels can be daisy-chained to the switcher (see Cabling Information later 
in this section). There are three Remote Aux Panel configurations available, 
identified by the number of rack units (RUs) each occupies in the 
equipment rack. See 

Panel Options stand-alone documentation (TP 0699-01) for operating, 
testing, and troubleshooting information.

The panels are designed to control 48 external inputs (24 unshifted and 24 
shifted). On the Model 2200, input s 17 through 24, aux 6A through aux 9B, 
the M/E 3 and Pgm buttons are disabled (inputs 1 through 16, and shift 1 
through shift 16 are the active crosspoints).

Each crosspoint lamp on the Remote Aux panel will high tally when that 
input is on the air. There is an ON AIR lamp on the 1-RU Remote Aux panel 
(P/N 088901) which will illuminate to indicate that the selected input is on 
the air. The on-air tally can be permanently enabled on all three Remote 
Aux Panels.