TP-LINK T1500-28PCT Manual Do Utilizador

Página de 200
 
145
 
function, please use 
no spanning-tree guard tc command. A switch removes 
MAC address entries upon receiving TC-BPDUs. If a malicious user 
continuously sends TC-BPDUs to a switch, the switch will be busy with 
removing MAC address entries, which may decrease the performance and 
stability of the network. With the Protect of Spanning Tree function enabled, you 
can configure the number of TC-BPDUs in a required time, so as to avoid the 
process of removing MAC  addresses frequently. 
Syntax 
spanning-tree guard tc 
no spanning-tree guard tc 
Command Mode 
Interface Configuration Mode (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example 
Enable the TC Protect of Spanning Tree for port 2:
 
T1500-28PCT(config)# interface fastEthernet 1/0/2 
T1500-28PCT(config-if)# spanning-tree guard tc 
spanning-tree mcheck 
Description 
The 
spanning-tree mcheck command is used to enable mcheck. 
Syntax 
spanning-tree mcheck 
Command Mode 
Interface Configuration Mode (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example 
Enable mcheck for port 2:
 
T1500-28PCT(config)# interface fastEthernet 1/0/2 
T1500-28PCT(config-if)# spanning-tree mcheck