TP-LINK T1500-28PCT Manual Do Utilizador

Página de 200
 
22
 
Parameter 
vlan-list —— Specify IEEE 802.1Q VLAN ID list, ranging from 2 to 4094, in the 
format of 2-3, 5. It is multi-optional. 
tagged | untagged —— Egress rule,untagged or tagged. Tagged: All packets 
forwarded by the port are tagged. The packets contain VLAN information. 
Untagged: Packets forwarded by the port are untagged. 
Command Mode 
Interface Configuration Mode (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example 
Add port 4 it to VLAN  2 and configure the type of port 4 as tagged: 
T1500-28PCT(config)# interface fastEthernet 1/0/4 
T1500-28PCT(config-if)# switchport general allowed vlan 2 tagged 
switchport pvid 
Description 
The 
switchport pvid  command is used to configure the PVID for the switch 
ports. 
Syntax 
switchport pvid vlan-id   
Parameter 
vlan-id —— VLAN ID, ranging from 1 to 4094. 
Command Mode 
Interface  Configuration  Mode  (interface fastEthernet / interface range 
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) 
Example 
Specify the PVID of port 2 as 2: 
T1500-28PCT(config)# interface fastEthernet 1/0/2 
T1500-28PCT(config-if)# switchport pvid 2  
show vlan summary 
Description 
The 
show vlan summary  command is used to display the summarized 
information of IEEE  802.1Q VLAN.