Toshiba ProT1!0 Manual Do Utilizador

Chapter 4 Replacement Procedures

4.3 HDD

Removing a HDD-H9.5mm

The following describes the procedure for removing the HDD (See Figure 4-3-1 to 4-3-3).

CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause

data loss or damage to the device.

1. Turn the computer upside down.

2. Remove the following screws with a T6-bit TORX securing HDD slot cover and

remove HDD slot cover.

 M2.04.0U

FPH(T6) screw

3. Remove the following screws securing the HDD assembly.

 M2.04.0F

FLAT BIND screw

4. Disconnect the HDD assembly from the connector on the HDD cable

MAIN HDD

Figure 4-3-1

Turn

the computer upside down

Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)