Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Toshiba
  4. ProT1!0
  5. Manual Do Utilizador

Toshiba ProT1!0 Manual Do Utilizador

Download
Página de 279
Chapter 4 Replacement Procedures 
4.12 System board 
CAUTION:  1. when handling the system board, always hold by the edges. Do not touch 
the printed circuit face. 
   
 
 
2. if replacing with a new system board, execute the subtest01 Initial 
configuration in section 3.3 “Setting of the hardware configuration”. 
Removing the system board 
The following describes the procedure for removing the system board (See Figure 4-12-1). 
1.  Disconnect the LAN BOARD FFC, LCD CABLE, Antenna cable, Audio board 
FFC, HDMI FFC, Bluetooth cable, SIM CARD FFC, TP board FFC, Power 
Board FFC, HDD cable from the connector on the system board. 
2.  Remove the following screws securing the system board and remove the system 
board. 
  M2.03.0F      FLAT BIND screw  x2 
3.  Disconnect the RGB cable and DC-IN cable from the connector on the system board. 
 
Figure 4-12-1 Remove the system board 
Satellite T110 /  Satellite Pro T110 /  PORTEGE T110 Maintenance Manual (960-Q08) 
 
 
40