Toshiba ProT1!0 Manual Do Utilizador

The following describes the procedure for installing the LCD unit. 

Install the LCD supports (LCD unit side) and hinge to the LCD and secure them with the 
following screws. 

  M22.5F  FLAT BIND screw   

 

x4 

1.  Stand the LCD unit on the display cover and connect the LCD harness to the 

connector on the back of LCD. 

2.  Stick the MYLAR tape on the connector of LCD harness. 

3.  Secure the LCD unit with the following screws, and connect LCD harness with CCD 

FPC. 

  M2.03.0F 

 FLAT BIND screw   

x4 

4.  Secure the display mask with following screws 

  M2.04.0F        FLAT BIND screw               x4 

5.  Cover screws with  Screw MYLAR cover  x4