Toshiba ProT1!0 Manual Do Utilizador

The wiring diagram related to the power supply is shown below: 

 

An

o

Ch

o the 

PCN1 connector and wall outlet. If these cables are connected firmly, go to Check 

Check 2  Replace the AC adapter and the AC power cord with new ones. 

  If the DC IN icon does not light, go to Procedure 4. 

  If the battery icon does not light, go to Check 3. 

Check 3  Make sure the main battery pack is installed in the computer correctly. If the 

battery is properly installed and the battery icon still does not light, go to 
Procedure 4.  

Check if the power supply controller charges the battery pack properly. Perform the 
following procedures: 

Check 1  Make sure the AC adapter is firmly plugged into the DC IN socket

.

  

Check 2  Make sure the battery pack is properly installed. If it is properly installed, go to 

Check 3. 

Check 3  The battery pack may be completely discharged. Wait a few minutes to charge the 

battery pack while connecting the battery pack and the AC adapter. If the battery 
pack is still not charged, go to Check 4. 

Check 4  The battery’s temperature is too high or low. Leave the battery for a while to 

adjust it in the right temperature. If the battery pack is still not charged, go to 
Check 5. 

Check 5  Replace the battery pack with a new one. If the battery pack is still not charged, 

y of the c nnectors may be disconnected. Perform Check 1. 

eck 1  Make sure the AC adapter and the AC power cord is firmly plugged int

2.