Toshiba ProT1!0 Manual Do Utilizador

HDMI signals are connected to display circuits via HDMI cable and HDMI&USB board. Any 
of these components may be faulty. Refer to Chapter 4, Replacement Procedures, for 

 

If characters or graphics on the internal display are not displayed clearly, perform 
Check 1. 

If some screen functions do not operate properly, perform Check 4. 

Check 1  HDMI cable may be faulty. Replace HDMI cable with a new one following the 

instructions in Chapter 1, Replacement Procedure and test the display again. If the 
problem still occurs, perform Check 2. 

Check 2  HDMI monitor may be faulty. Replace HDMI monitor with a new one following 

the instructions in Chapter 2, Replacement Procedure and test the display again.  If 
the problem still occurs, perform Check 3 

Check 3  HDMI&USB board may be faulty. Replace it with a new one following the 

instructions in Chapter 3, Replacement Procedure. 

Check 4  System board may be faulty. Replace it with a new one following the instructions 

in Chapter 4, Replacement Procedure. 

 

 

 

 

 

 

 

 

 

 

 

instructions on how to disassemble the computer and then perform the following checks: