HP (Hewlett-Packard) 217823-002 Manual Do Utilizador

There are two options for replacing UPS batteries: 

•  Powering down the UPS before removing the batteries 
•  In certain circumstances, replacing the batteries without powering down the UPS 

 

 

CAUTION:  While replacing the batteries without powering down the UPS, the UPS is not 
protected in the event of a utility power failure.  

Batteries can be replaced without powering down the UPS if the UPS is not supplying battery 
power to devices (utility is present, indicating that the UPS is supplying utility power). 

To replace batteries with the UPS powered down: 

1.  Shut down all load devices. 

2.  Press the Standby button to take the UPS out of Operate mode.  

3.  Disconnect the UPS from utility power. 

4.  Wait at least 60 seconds while the UPS internal circuitry discharges. 

To remove the battery pack: 

1.  Remove the UPS front bezel by pulling on both ends (1).