Toshiba PSAGUX Manual Do Utilizador

The power supply unit provides many different voltages for the system board and performs the 
following functions: 

1.  Power input monitor 

y  Checks whether the DC power supply (AC adapter) is connected to the computer. 

y  Checks whether the battery pack is connected to the computer. 

y  Monitors the DC power supply input voltage (AC Adapter output voltage). 

2.  Power supply's internal control 

y  Turns on and off the battery pack charging power supply. 

y  Issues a charging current instruction to the PWM control IC of the battery pack charging 

power supply. 

y  Controls the supply of DC power supply input (AC Adapter output) to the power supply 

unit. 

y  Controls the supply of power to the system block (load/logic circuit side). 

y  Controls forced shutdown if the power supply malfunctions. 

3.  Logic circuit control 

y  Instructs the gate array to enable/disable tuning the power on. 

y  Controls power-on/off operation. 

4.  Status display 

y  Turns on the Power LED (in white or Green or Orange blink). 

y  Battery indicator (in white or Green or Orange blink). 

5.  External interface 

y  Performs communication through the I2C bus (via the internal EC/KBC). 

y  Transfers the power supply operation mode. 

6.  Output monitor 

y  Monitors the voltage output to the system block (load/logic circuit side). 

y  Monitors the voltage, over voltage, input/output current of the battery pack. 

y  Monitors the internal temperature of the battery pack. 

y  Monitors the supply voltage from the AC adapter.