Toshiba PSAGUX Manual Do Utilizador

To check if the computer’s Speaker is defective or malfunctioning, follow the 
troubleshooting procedures below as instructed. 
 

Procedure 1  Test Program Check 

Procedure 2  Connector Check and Replacement Check 

 

Procedure 1 Test Program Check 
 
Execute the Audio test available as part of the maintenance test program.  See Chapter 3 for 
information on how to perform the test. 
If an error is detected in the test, go to Procedure 2.  If no error is detected, the Audio itself is 
normal. 

Procedure 2 Connector Check and Replacement Check 
 
The Audio or system board may be disconnected or faulty.  Disassemble the computer 
following the steps described in Chapter 4 and perform the following checks: 

Make sure the Speaker cable has been firmly connected to the system board. 

 

CPU

 

System board

Speaker

 

 

If the cable is loose or off, reconnect it firmly and return to Procedure 1.  If 
there is still an error, perform Check 2. 

The Speaker may be faulty.  Replace it with a new one following the 
instructions in Chapter 4.  If the problem persists, perform Check 3. 

The System board may be faulty.  Replace it with a new one following the 
instructions in Chapter 4.  If the Audio is still not functioning properly, 
perform Check 4. 

The memory may be defective. Replace the memory module with a new one

 

following the steps described in Chapter 4. If the problem persist, perform 
Check 5. 

Check 5 

The CPU may be faulty. Disassemble the computer following the steps 
described in Chapter 4 and replace the CPU with a new one.