Toshiba PRO T210 Manual Do Utilizador

Remove the HDD board according to the following procedures and Figure 4.25: 

1.  Disconnect the HDD board cable from the motherboard and remove the two M2x3 screws 

securing the HDD board to the logic lower assembly, as shown in Figure 4.25. 

M2x3*2 

 

2.  Remove the HDD board. 

 

Install the HDD board according to the following procedure: 

1.  Seat the HDD board in the logic lower assembly and secure with two M2x3 screws. 

2.  Connect the HDD board cable to the motherboard.