Toshiba PROA500 Manual Do Utilizador

3.  Detach one Power board FFC and one Touch Pad cable as shown in Figure 4.14. 

 

4.  Lift up the logic upper assembly. 

 

Install the logic upper assembly according to the following procedures. 

1.  Seat the logic upper assembly to the front of the laptop, and adjust to the correct position. 

2.  Attach the two cables and secure the six screws as indicated in Figure 4.14 and 4.13. 

3.  Turn the laptop upside down and secure it with 17 screws as indicated in Figure 4.12: 

  fourteen M2.5x8 screws 
  three M2x3 screws