Toshiba PQQ14U-004001 Manual Do Utilizador

32

Using a small Phillips screwdriver, loosen the captive screw 
that secures the memory module slot cover.

Remove the memory module slot cover.

Place the screw and the cover in a safe place so that you can 
retrieve them later.

Static electricity can damage the memory module. Before you handle 
the module, touch a grounded metal surface to discharge any static 
electricity you may have built up.

Avoid touching the connector on the memory module or on the 
computer. Grease or dust on the connector may cause memory 
access problems.

Carefully remove the new memory module from its antistatic 
packaging, without touching its connector.

Locate an empty memory module slot on the back of the 
computer. 

If no memory slot is available, you must remove a module by 
performing steps 

 of 

If your system has the memory modules stacked on top of one 
another, you must remove the top module first before 
removing/installing the bottom module.

Back of monitor

Memory module slot cover