Toshiba PQQ14U004001 Manual Do Utilizador

118

Make sure the computer is connected to a power source and turned 
on. The optical disc drive eject mechanism requires power to 
operate.

Make sure a program is not accessing the drive and preventing it 
from ejecting.

If you need to remove a disc and cannot turn on the computer, use a 
narrow object, such as a straightened paper clip, to press the manual 
eject button. This button is in the small hole next to the optical disc 
drive eject button on the face of the optical disc drive tray.

Never use a pencil to press the manual eject button. Pencil lead can 
break off inside the computer and damage it.

Check that the type of disc you are using is compatible with your 
optical disc drive. For more information regarding supported 
optical media formats, refer to the complete detail specifications for 
your computer at 

. 

If the problem is with an optical data disc, refer to the software’s 
documentation and check that the hardware configuration meets the 
program’s needs.

Press the button on the optical disc drive itself. For additional 
information see 

Make sure you are connected to the Internet.

You can change the destination of the audio signal in Sound 
properties in the Control Panel.