Zebra Technologies 105SL Plus Manual Do Utilizador
89
Printer Configuration and Adjustment
Changing Printer Settings
7/3/13
P1056468-002
Maintenance and Diagnostic Tools
Table 8 • Maintenance and Diagnostic Tools
Supplies Low
Warning
Warning
When this feature is enabled, the printer provides warnings when the media or ribbon is
reaching near the end of the roll.
reaching near the end of the roll.
Accepted values:
MEDIA DISABLED, MEDIA ENABLED
Related ZPL command(s):
^JH
SGD command used:
none
Control panel menu item:
Printer web page:
View and Modify Printer Settings > General Setup
> Early Warning (Media)
Early Warning
for Maintenance
for Maintenance
When this feature is enabled, the printer provides warnings when the printhead needs to
be cleaned.
be cleaned.
Accepted values:
MAINT. OFF, MAINT. ON
Related ZPL command(s):
^JH
SGD command used:
none
Control panel menu item:
Printer web page:
View and Modify Printer Settings > General Setup
> Early Warning (Maintenance)
Printhead
Cleaning Interval
Cleaning Interval
When Early Warning for Maintenance is enabled, set this value to the length of the
media or ribbon roll that you are using.
media or ribbon roll that you are using.
When the printhead reaches the set length,
WARNING CLEAN PRINTHEAD
appears on
the control panel display. If the alert function is enabled, the printer generates an alert.
Accepted values:
0 M/0 FT to 450M/1476 FT in 50 M increments
Related ZPL command(s):
^JH
SGD command used:
none
Control panel menu item:
Printer web page:
View and Modify Printer Settings > General Setup
> Head Cleaning
Printhead Life
Expectancy
Expectancy
When Early Warning for Maintenance is enabled, set this value to the number of inches
of media that the printhead is expected to print.
of media that the printhead is expected to print.
When the printhead reaches the set length,
WARNING REPLACE HEAD
appears on the
control panel display. If the alert function is enabled, the printer generates an alert.
Accepted values:
0 M/0 FT to 450M/1476 FT in 50 M increments
Related ZPL command(s):
^JH
SGD command used:
none
Control panel menu item:
Printer web page:
View and Modify Printer Settings > General Setup
> Head Life