Savin C3528 Manual Do Utilizador

Reception Features

30

•

KK and LL indicate that the message is split over two pages of paper with
the orientation and size shown.

❒ Paper placed in the bypass tray is not usually selected for printing a received

message. However, you can use this tray if you select the bypass tray as the
main paper tray using Reception with Specified Senders. 

⇒ P.115 “Treating

❒ The paper size used to print a received message may be different from the size

of the sent original.

❒ Widths that this machine can receive are A4, B4, LT, LG, and A3. Any mes-

sages narrower than A4 or LT are sent as A4 or LT width with the length un-
changed.

P.26 “Page Separation and Length Reduction (Not Available in Some Countries)”
P.27 “Page Reduction”
P.25 “Image Rotation”

If you turn this feature on and no paper tray is stocked with paper of a suitable
size to print a received document, a message will appear on the display prompt-
ing you to load paper of the required size. When you have loaded the new paper,
you can then print the message.
Two messages can appear:
• Paper Cassette

• Bypass Tray

❒ By default, this message is turned off. You can turn this message on with the

User Parameters. 

⇒ P.130 “Changing the User Parameters”(Switch05, Bit5)

Page Reduction

Disabled

Reduction in Sub-scan Direction 

Enabled

Page Separation Threshold

20mm

Width or Length Priority

Width

ND0X04E0

Paper designated to print FAX/Lists are
empty.
Refill A4     paper.

OK

ND0X04E0.eps

ND0X01E6

Paper designated to print FAX/Lists are
empty.
Refill A4     paper to Bypass tray.

OK

nd0x01e6.eps