Savin C3528 Manual Do Utilizador

Advanced Transmission Features

Confidential Transmission

If you do not want your message to be
picked up casually at the other end,
use this feature. The message will be
stored in memory at the other end
and will not be printed until an ID is
entered.

Preparation

If you install the optional Expan-
sion Memory or Hard Disk option,
program the Confidential ID.

⇒

P.125 “ID Code”

There are two types of Confidential
Transmission:

❖

❖ Default ID

The other party can print the mes-
sage by entering the Confidential
ID programmed in their machine.

❖

❖ ID Override

Should you wish to send a confi-
dential message to a particular per-
son at the other end, you can
specify the Confidential ID that
person has to enter to see that mes-
sage. Before you send the message,
do not forget to tell the intended
receiver the ID that must be en-
tered to print.

Limitation

❒ The destination machine must be

of the same make and have the
Confidential Reception feature.

❒ The destination machine must

have enough memory available.

Note

❒ If optional Expansion Memory is

installed, we recommend that you
program the Confidential ID be-
forehand.

❒ An ID can be any 4 digit number

except 0000.

Set your original and select any
scan settings you require.

Press [Mode].

The Transmission Mode menu ap-
pears.

Enter the “Confidential TX” func-
tion number with the number
keys.

Depending on the Confidential
Transmission type, use one of the
following procedures:

ND1X01E5

Transmitter

Receiver

Nd1x01e5.eps

Us28-1.tif

Us79-1.tif