Savin 3360DNP Manual Do Utilizador
Operation
88
1
• There is no limit to the number of areas you can designate on a single com-
mand sheet.
• If designated areas on two or more command sheets overlap, the last com-
mand sheet will apply to the overlapping portion.
• If you use Outline mode for letter images with a thickness of less than 3mm,
0.12", the print image might come out as expected.
-
-
-
-Notes
The image might differ depending on how the designated area is drawn, so re-
member the following when making the command sheet.
member the following when making the command sheet.
Designated area
Area recognized
Preferred designated area
Part of the designated area is
surrounded by 3 sides of the en-
tire area.
surrounded by 3 sides of the en-
tire area.
Make a space of at least 2mm,
0.08", in front of the area surround-
ed by 3 sides (relative to the feed
direction).
0.08", in front of the area surround-
ed by 3 sides (relative to the feed
direction).
1, 2 = 2mm, 0.08"
Double line pattern.
Only the outer line is
recognized.
recognized.
Make a gap of at least 2mm, 0.08"
in width.
in width.
1
2