Ricoh AP610N Manual Do Utilizador
Cleaning the Paper Feed Roller
45
3
Cleaning the Paper Feed Roller
If the paper feed roller is dirty, a mis-
feed might occur. In this case, clean
the roller as follows:
feed might occur. In this case, clean
the roller as follows:
R CAUTION:
Important
❒ The following are examples of clean-
ing the paper feed roller on the pa-
per tray.
per tray.
❒ You can clean the paper feed roller
on the optional paper feed unit by
following the procedures below.
The paper feed roller on the op-
tional paper feed unit differs from
the one on the paper tray. Confirm
the type of paper feed roller you
are installing.
following the procedures below.
The paper feed roller on the op-
tional paper feed unit differs from
the one on the paper tray. Confirm
the type of paper feed roller you
are installing.
A
For the paper tray
B
For the paper feed unit
A
Turn off the power.
B
Pull out the plug from the socket.
Remove all the cables from the
printer.
Remove all the cables from the
printer.
C
Lift the paper tray slightly, and
then pull it out until it stops. Lift
the front side of the tray, and then
pull it out of the printer.
then pull it out until it stops. Lift
the front side of the tray, and then
pull it out of the printer.
D
Move the printer to the edge of a
stable table or desk.
stable table or desk.
Important
❒ Do not put the printer on an un-
stable or tilted surface.
❒ If the printer is equipped with
the optional paper feed unit, do
not move the printer and unit
together as they are not securely
attached.
not move the printer and unit
together as they are not securely
attached.
❒ When lifting the printer, con-
firm that the optional paper
feed unit is not attached to the
printer.
feed unit is not attached to the
printer.
• When lifting the printer, use the
grips on both sides of the printer,
otherwise the printer might fall
and cause personal injury.
otherwise the printer might fall
and cause personal injury.
• When you move the printer, un-
plug the power cord from the wall
outlet to avoid a fire or an electric
shock.
outlet to avoid a fire or an electric
shock.
• When you pull out the plug from
the socket, grip the plug to avoid
damaging the cord and causing
a fire or an electric shock.
damaging the cord and causing
a fire or an electric shock.
AGN017S
ZKGY140E
AGN021S
KirP4GB_Mainte-F6_FM_forPaper.book Page 45 Thursday, May 12, 2005 11:48 AM