Savin 2585 Manual Do Utilizador

Settings You can Change with the User Tools

11

System Reset

If no operation is performed for a selected time, the machine 
will automatically return to initially selected display.

This function is called “System Reset”. You can set the time 
between 10 and 999 seconds.

❒ Default: 60 seconds

Energy Saver Timer

The machine enters the Energy Saver mode automatically a 
certain time after your job is finished. You can set the time 
between 1 and 240 minutes.

❒ Default: 15 minutes (1 minute steps)

Panel Off Timer

The machine enters to the Panel Off mode automatically af-
ter your job is finished, after the selected time. You can set 
the time between 10 and 999 seconds.

❒ Default: 60 seconds (1 second steps)

See “Auto Off Timer”

Auto Off Timer

The machine turns itself off automatically to conserve ener-
gy a certain time after your job is finished. This function is 
called “Auto Off”. You can set the time between 1 and 240 
minutes.

❒ If you use these three functions (Energy Saver Timer, 

Panel Off Timer and Auto Off Timer), when your copy 
job ends, the machine will enter the Panel Off mode ac-
cording to the Panel Off Timer after the specified time. 
Next, it will enter the Energy Saver mode according to 
the Energy Saver Timer after the specified time. Then it 
will turn itself off automatically according to the Auto 
Off Timer after the specified time.

❒ Default:

• Type1: 90 minutes (1 minute steps)

Type2: 120 minutes (1 minute steps)

❒ Auto Off might not be effective when an error message is 

displayed.

❒ To return to the Ready condition from Auto Off, the ma-

chine requires the same warm-up time as the time for be-
coming ready after its power is turned on.