Citizen CT-S300 Manual Do Utilizador

— 123 —

Selecting STANDARD MODE

<1B>H<53>H

Switches from PAGE MODE to STANDARD MODE.

• This command is only effective if it is entered when in PAGE MODE.

• Any data mapped in PAGE MODE is erased.

• After this command is executed, the beginning of the line is taken as the next print

start position.

• The print area defined by ESC W is initialized.

• The commands listed below, which have separate settings for STANDARD MODE

and PAGE MODE, are changed to the settings for STANDARD MODE use.

(1)

Spacing setting: ESC SP, FS S

(2)

Line feed width setting: ESC 2, ESC 3

• The following commands are valid only in setting in STANDARD MODE.

(1) ESC W

Sets the space amount for setting print area in PAGE MODE.

(2) ESC T

Selects the printing direction of character in PAGE MODE.

(3) GS $

Sets the absolute position of character vertical direction in PAGE
MODE.

• STANDARD MODE is selected when the printer is turned on or reset, or when ESC

@ is executed.

FF, ESC FF, ESC L