Acer X1230 Manual Do Utilizador
23
Eng
lis
h
Management
Administrator Password
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
You can enter "Administrator Password" when the "Enter
Administrator Password" or "Enter Password" dialogue box
displays.
•
Press
to change "Administrator Password".
•
The factory default of "Administrator Password" is
"1234".
"1234".
If you forget your administrator password, do the following
to retrieve the administrator password:
to retrieve the administrator password:
•
Enter the unique 6-digit "Universal Password" which is
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
printed on the Security Card that came with your
projector. This unique password will be accepted by the
projector no matter what the administrator password is.
•
If the Security Card is lost, please contact your local Acer
service center.
service center.
VGA OUT
(Standby)
(Standby)
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN and
VGA OUT sockets are correctly connected to the devices.
a VGA signal when it is in standby mode and the VGA IN and
VGA OUT sockets are correctly connected to the devices.
Enabling this function slightly increases the standby
power consumption.
Reset
Press
after choosing "Yes" to return the display
parameters on all menus to the factory default settings.
ECO Mode
Choose "On" to dim the projector lamp, which will also
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.