Extreme networks 10018 Manual Do Utilizador
Remove an XFP Module
You can remove an XFP module from your Extreme Networks switch or I/O module without powering
off the system. The XFP module is shown in
off the system. The XFP module is shown in
Note
Disconnect fiber-optic cable from an XFP module before removing the XFP module from the
port.
Disconnect fiber-optic cable from an XFP module before removing the XFP module from the
port.
1 Rotate the handle (bail latch) on the XFP module downward (
2 Carefully pull the XFP module out of the port.
Figure 18: Removing an XFP Module
3 Place the dust covers back into the XFP module connectors.
4 Place the XFP module immediately into an antistatic container to protect it from ESD damage and
4 Place the XFP module immediately into an antistatic container to protect it from ESD damage and
dust.
Extreme Networks XFP Modules
Pluggable Hardware Installation Guide
41