ZyXEL Communications 2602HWL-DXA Manual Do Utilizador

 

All contents copyright (c) 2005 ZyXEL Communications Corporation.   

182

If the VPN connection is initiated from the security gateway behind Prestige, no configuration is 

necessary for NAT nor Firewall.   

If the VPN connection is initiated from the security gateway outside of Prestige, NAT port forwarding 

and Firewall forwarding are necessary.     

To configure NAT port forwarding, please go to WEB interface, Setup/ "SUA/NAT", put the secure 

gateway's IP address in default server. 

To configure Firewall forwarding, please go to WEB interface, Setup/Firewall, select Packet Direction to 

WAN to LAN, and create a firewall rule the forwards IKE(UDP:500). 

No, Prestige can't support them simultaneously. You need to choose either one. If Prestige is to support IPSec 

passthrough, you have to disable the VPN function on Prestige. To disable it, you can either deactivate each 

VPN rule or issue a CI command, "ipsec switch off" from SMT menu 24.8. You can get into SMT menu via 

either telnet or console connection. 

 

 

Wireless FAQ   

 

 

Wireless LANs provide all the functionality of wired LANs, without the need for physical connections 

(wires). Data is modulated onto a radio frequency carrier and transmitted through the ether. Typical 

bit-rates are 11Mbps and 54Mbps, although in practice data throughput is half of this. Wireless LANs can 

be formed simply by equipping PC's with wireless NICs.    If connectivity to a wired LAN is required an 

Access Point (AP) is used as a bridging device. AP's are typically located close to the centre of the 

wireless client population.   

 

 

Wireless LAN systems can provide LAN users with access to real-time information anywhere in their 

organization. This mobility supports productivity and service opportunities not possible with wired