ZyXEL Communications ONU-6040BF-2x Manual Do Utilizador
3
Introduction
The ONU-6040BF-2x is an optical network unit (ONU)
that allows you to enjoy high-speed Internet access
over optical networks. The ONU-6040BF-2x comes with
one fiber, four 10/100 Mbps RJ-45 ports and one co-
axial CATV connector. No configuration is required. On
the ONU-6040BF-2x, all device configuration is done
remotely by the OLT (Optical Line Terminal). Once you
have connected the hardware, you are ready to enjoy
Internet access.
that allows you to enjoy high-speed Internet access
over optical networks. The ONU-6040BF-2x comes with
one fiber, four 10/100 Mbps RJ-45 ports and one co-
axial CATV connector. No configuration is required. On
the ONU-6040BF-2x, all device configuration is done
remotely by the OLT (Optical Line Terminal). Once you
have connected the hardware, you are ready to enjoy
Internet access.
Two ONU-6040BF-2x models are discussed in this
guide: ONU-6040BF-21 (with a 10km transceiver) and
ONU-6040BF-22 (with a 20km transceiver).
guide: ONU-6040BF-21 (with a 10km transceiver) and
ONU-6040BF-22 (with a 20km transceiver).
Hardware Connections
1. PON: Follow the steps below to connect an SC-type,
single-mode optical cable to the PON port for
Internet access.
Only qualified technicians should perform these actions!
Please skip this section if you are not a qualified
technician.
Please skip this section if you are not a qualified
technician.