Vanguard Managed Solutions 342 Manual Do Utilizador
3-6
Installation and Replacement
Installing The Vanguard 342
Installing Your Vanguard 342
Installation
Complete these steps to install your Vanguard 342:
Step
Action
1
Unpack the Vanguard 342, and inspect the unit to ensure you have all the
components.
components.
2
Install any daughtercards, or memory modules that you need to add to the
unit, as necessary.
unit, as necessary.
3
Be sure that the four rubber feet are on the bottom of the enclosure.
4
Attach the power cord and cables to the rear panel.
5
Place the enclosure in the selected site, and power unit on. Do not block
the fan inlet or outlet vents.
the fan inlet or outlet vents.
6
Ensure the fan is operational after powering the unit on by checking to see
if air blows out of the unit.
if air blows out of the unit.
7
Ensure that the ambient temperature at the fan inlet is within the
temperature range specified in Appendix A.
temperature range specified in Appendix A.