ZyXEL Communications VSG1432-B101 Series Manual Do Utilizador
Chapter 10 Quality of Service (QoS)
VSG1432-B101 Series User’s Guide
157
10.5 The Class Setup Screen
Use this screen to add, edit or delete QoS classifiers. A classifier groups traffic into
data flows according to specific criteria such as the source address, destination
address, source port number, destination port number or incoming interface. For
example, you can configure a classifier to select traffic from the same protocol
port (such as Telnet) to form a flow.
data flows according to specific criteria such as the source address, destination
address, source port number, destination port number or incoming interface. For
example, you can configure a classifier to select traffic from the same protocol
port (such as Telnet) to form a flow.
You can give different priorities to traffic that the ZyXEL Device forwards out
through the WAN interface. Give high priority to voice and video to make them run
more smoothly. Similarly, give low priority to many large file downloads so that
they do not reduce the quality of other applications.
through the WAN interface. Give high priority to voice and video to make them run
more smoothly. Similarly, give low priority to many large file downloads so that
they do not reduce the quality of other applications.
Click Network Settings > QoS > Class Setup to open the following screen.
Figure 55 Network Settings > QoS > Class Setup
The following table describes the labels in this screen.
Table 33 Network Settings > QoS > Class Setup
LABEL
DESCRIPTION
Add new
Classifier
Classifier
Click this to create a new classifier.
#
This is the index number of the entry.
Status
This field displays whether the classifier is active or not. A yellow bulb
signifies that this classifier is active. A gray bulb signifies that this
classifier is not active.
signifies that this classifier is active. A gray bulb signifies that this
classifier is not active.
Class Name
This is the name of the classifier.
Classification
Criteria
Criteria
This shows criteria specified in this classifier, for example the interface
from which traffic of this class should come and the source MAC
address of traffic that matches this classifier.
from which traffic of this class should come and the source MAC
address of traffic that matches this classifier.
DSCP Mark
This is the DSCP number added to traffic of this classifier.
802.1P Mark
This is the IEEE 802.1p priority level assigned to traffic of this
classifier.
classifier.
VLAN ID Tag
This is the VLAN ID number assigned to traffic of this classifier.