ZyXEL Communications P-312 Manual Do Utilizador
P312 Broadband Security Gateway
10-4
Transferring Files
Step 4.
After successful firmware upload, enter
atgo
to restart the Prestige.
Figure 10-4
Menu 24.7.1 - System Maintenance - Upload Router Firmware
10.4.2 Uploading Router Configuration File
The configuration data, system-related data, the error log and the trace log are all stored in the configuration
file. Please be aware that uploading the configuration file replaces everything contained within.
file. Please be aware that uploading the configuration file replaces everything contained within.
Menu 24.6 replaces the current configuration with your customized configuration you
backed up previously. Menu 24.7.2 shows you the instructions for uploading the Router
Configuration file that replaces the current configuration file with the default
configuration file, i.e., P312.rom. You will lose all configurations that you had before
and the speed of the console port will be reset to the default of 9600 bps with 8 data
bit, no parity and 1 stop bit (8n1). You will need to change your serial
communications software to the default before you can connect to the Prestige again.
The password will be reset to the default of 1234, also.
Follow the procedure below to upload the configuration file:
Step 1.
Enter
y
at the prompt to go into debug mode.
Step 2.
Enter
atlc
after the
Enter Debug Mode
message.
Step 3.
Wait for the
Starting XMODEM upload
message before activating Xmodem upload on
your terminal.
Step 4.
After successful firmware upload, enter
atgo
to restart the Prestige.
Menu 24.7.1 - System Maintenance - Upload Router Firmware
FTP and TFTP are the preferred methods for uploading router
firmware to your Prestige since FTP and TFTP are faster.
To upload router firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
firmware to your Prestige since FTP and TFTP are faster.
To upload router firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
Warning: Proceeding with the upload will erase the current router
firmware.
Do You Wish To Proceed:(Y/N)
firmware.
Do You Wish To Proceed:(Y/N)