ZyXEL Communications G-120 Manual Do Utilizador
ZyXEL G-120 User’s Guide
Chapter 4 Wireless Station Mode Configuration
49
4.3.1.2 WPA-PSK/WPA2-PSK
Figure 26 Station Mode: Security Setting: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
4.3.1.3 WPA/WPA2
Figure 27 Station Mode: Security Setting: WPA/WPA2
Table 7 Station Mode: Security Setting: WPA-PSK/WPA2-PSK
LABEL
DESCRIPTION
Encryption Type
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Pre-Shared Key
Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Back
Click Back to go to the Site Survey screen to select and connect to another
network.
Next
Click Next to confirm your selections and advance to the Confirm New Settings
screen. Refer to
.
Exit
Click Exit to return to the Site Survey screen without saving.