ZyXEL Communications G-120 Manual Do Utilizador
ZyXEL G-120 User’s Guide
62
Chapter 5 Access Point Mode Configuration
3 Set the wireless station’s IP address to be dynamic if you want the wireless stations to
for how to configure your computer’s IP address.
5.2 The Link Info Screen
Select the AP Mode check box and wait for about five seconds to display the screen as shown.
Figure 39 Access Point Mode: Link Info
The following table describes the labels in this screen.
Table 16 Access Point Mode: Link Info
LABEL
DESCRIPTION
Status
SSID
This field displays the name that identifies your G-120 in the wireless LAN
network.
Current Channel
This field displays the radio channel the G-120 is currently using.
Transmission
Rate
This field displays the current transmission rate of the G-120 in megabits per
second (Mbps).
Security
This field shows whether data encryption is activated (WEP) or inactive
(Disabled).
MAC
This field displays the MAC address of the G-120.
Output Power
This field shows the strength of the G-120’s antenna gain or transmission power.
Association List
This table lists up to 16 wireless clients that are currently connected to the G-120.
Denotes a wireless client without WEP security.
Denotes a wireless client with WEP security enabled.