ZyXEL Communications G-120 Manual Do Utilizador

ZyXEL G-120 User’s Guide

Chapter 5 Access Point Mode Configuration

65

The MAC Filter screen allows you to configure the G-120 to give exclusive access to 
(Accept) devices or exclude devices from (Reject) connecting to the G-120. The MAC 
address is assigned at the factory and consists of six pairs of hexadecimal characters, for 
example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to 
configure this screen. See 

 for more information.

Figure 41   Access Point Mode: MAC Filter 

The following table describes the labels in this screen. 

Table 18   Access Point Mode: MAC Filter 

Filter Type 

Define the filter action for the list of MAC addresses in the MAC address filter 

table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the G-120, MAC addresses not listed will be 

allowed to access the G-120.
Select Accept to permit access to the G-120, MAC addresses not listed will be 

denied access to the G-120.

Filter MAC 

Address 1-16

Specify the MAC address(es) of the wireless station(s) that is allowed or denied 

association to the G-120.
Enter six pairs of hexadecimal digits (separated by colons) in the range of “A-F”, 

“a-f” and “0-9” (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a 

warning screen will be displayed.

Save

Click Save to save the changes back to the G-120.

Cancel

Click Cancel to discard the changes.