ZyXEL Communications wireless n gigbit router zyxel Manual Do Utilizador
Chapter 12 Dynamic DNS
NBG-460N User’s Guide
174
Note: If you have a private WAN IP address, then you cannot use Dynamic DNS. You
must have a public WAN IP address.
12.4 Dynamic DNS Screen
Use this screen to enable DDNS and configure the DDNS settings on the NBG-
460N.
460N.
To change your NBG-460N’s DDNS, click Network > DDNS. The screen appears
as shown.
as shown.
Figure 120 Network > Dynamic DNS
The following table describes the labels in this screen.
Table 61 Network > Dynamic DNS
LABEL
DESCRIPTION
Enable Dynamic
DNS
DNS
Select this check box to use dynamic DNS.
Service Provider
Select the name of your Dynamic DNS service provider.
Dynamic DNS Type
Select the type of service for which you are registered from your
Dynamic DNS service provider.
Dynamic DNS service provider.
Host Name
Enter the host name/s in the field provided. You can specify up to
two host names in the field separated by a comma (",").
two host names in the field separated by a comma (",").
User Name
Enter your user name.
Password
Enter the password assigned to you.