ZyXEL Communications wireless n gigbit router zyxel Manual Do Utilizador
Chapter 3 Introducing the Web Configurator
NBG-460N User’s Guide
37
• Select a language to go to the basic Web Configurator in that language. To
change to the advanced configurator see
.
Figure 11 Selecting the setup mode
3.3 Resetting the NBG-460N
If you forget your password or IP address, or you cannot access the Web
Configurator, you will need to use the RESET button at the back of the NBG-460N
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the password will be reset to “1234”
and the IP address will be reset to “192.168.1.1”.
Configurator, you will need to use the RESET button at the back of the NBG-460N
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the password will be reset to “1234”
and the IP address will be reset to “192.168.1.1”.
3.3.1 Procedure to Use the Reset Button
1
Make sure the power LED is on.
2
Press the RESET button for five seconds or until the power LED begins to blink
and then release it. When the power LED begins to blink, the defaults have been
restored and the NBG-460N restarts.
and then release it. When the power LED begins to blink, the defaults have been
restored and the NBG-460N restarts.
3.4 Navigating the Web Configurator
The following summarizes how to navigate the Web Configurator from the Status
screen in Router Mode and AP Mode.
screen in Router Mode and AP Mode.