Peerless Industries HDS200 Manual Do Utilizador
19 of 36
ISSUED: 07-24-12 SHEET #: 180-9023-1
Before starting the installation, please ensure that all source components (Blu-ray player, cable box,
etc.) and the display equipment (TV, display, projector, etc.) are turned off.
etc.) and the display equipment (TV, display, projector, etc.) are turned off.
Step 1
Connecting Source Components To The Transmitter
A. HDMI Media Source
•
Connect HDMI cable from the source components output to the Transmitter's HDMI1 or HDMI2 input
port.
port.
Note: It is recommended that HDMI1 input port be used if only one HDMI source component is present.
B. Composite Media Source
•
Video – Connect “yellow” composite video RCA post to yellow port.
•
Audio – Connect “red and white” composite audio RCA posts to the red and white ports.
C. VGA Media Source
•
Video - Connect the VGA cable from the media source’s VGA output to the Transmitter’s VGA input.
•
Audio - A 3.5mm stereo audio cable is required (not included) to transmit audio when using this
input. Connect the 3.5mm stereo audio cable from the VGA source component’s audio output to the
Transmitter's PC AUDIO-IN port.
input. Connect the 3.5mm stereo audio cable from the VGA source component’s audio output to the
Transmitter's PC AUDIO-IN port.
Installation and Operation
A
D
D
B
C