X-Micro Tech. XWL-11GRTX Manual Do Utilizador

 

 

6

 

3 Software 

configuration 

There are web based management and configuration functions allowing you to have 

the jobs done easily. 

 

The X-Micro WLAN 11g Broadband Router is delivered with the following factory 

default parameters on the Ethernet LAN interfaces. 

Default IP Address: 192.168.1.254 

Default IP subnet mask: 255.255.255.0 

WEB login User Name: <empty> 

WEB login Password: <empty> 

   

3.1 Prepare your PC to configure the X-Micro WLAN 11g Broadband 

Router 

1. Click the Start button and select Settings, then click Control Panel. The 

Control Panel window will appear.   

Note: Windows Me users may not see the Network control panel. If so, select 

View all Control Panel options on the left side of the window 

2.  Move mouse and double-click the right button on Network icon. The Network 

window will appear. 

3.  Check the installed list of Network Components. If TCP/IP is not installed, 

click the Add button to install it; otherwise go to step 6. 

4. Select Protocol in the Network Component Type dialog box and click Add 

button. 

5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click 

OK button to install the TCP/IP protocol, it may need the Microsoft Windows 

CD to complete the installation. Close and go back to Network dialog box after 

the TCP/IP installation. 

6. Select TCP/IP and click the properties button on the Network dialog box. 

7. Select Specify an IP address and type in values as following example. 

9 IP 

Address: 

192.168.1.1, any IP address within 192.168.1.1 to 

192.168.1.253 is good to connect the Wireless LAN Access Point. 

9  IP Subnet Mask: 255.255.255.0 

8.  Click OK and reboot your PC after completes the IP parameters setting.   

 

1. Click the Start button and select Settings, then click Control Panel. The 

Control Panel window will appear.