X-Micro Tech. XWL-11GRTX Manual Do Utilizador

 

 

15

 

 

Disable Wireless LAN 

Interface 

Click on to disable the wireless LAN data 

transmission. 

Band 

Click to select 2.4GHz(B) / 2.4GHz(G) / 

2.4GHz(B+G) 

Mode 

Click to select the WLAN AP / Client / WDS / 

AP+WDS wireless mode. 

Site Survey 

The Site Survey button provides tool to scan the 

wireless network. If any Access Point or IBSS is 

found, you could choose to connect it manually 

when client mode is enabled. Refer to 3.3.9 Site 

Survey. 

SSID 

It is the wireless network name. The SSID can be 32 

bytes long. 

Channel Number 

Select the wireless communication channel from 

pull-down menu. 

Associated Clients 

Click the Show Active Clients button to open Active 

Wireless Client Table that shows the MAC address, 

transmit-packet, receive-packet and 

transmission-rate for each associated wireless 

client. 

Enable Mac Clone 

(Single Ethernet 

Client) 

Take Laptop NIC MAC address as wireless client 

MAC address. [Client Mode only] 

Enable Universal 

Repeater Mode 

Click to enable Universal Repeater Mode 

SSID of Extended 

Interface 

Assign SSID when enables Universal Repeater 

Mode. 

Apply Changes 

Click the Apply Changes button to complete the 

new configuration setting. 

Reset 

Click the Reset button to abort change and recover 

the previous configuration setting. 

 

3.3.5 Wireless - Advanced Settings 

These settings are only for more technically advanced users who have a 

sufficient knowledge about wireless LAN. These settings should not be 

changed unless you know what effect the changes will have on your 

X-Micro WLAN 11g Broadband Router.