X-Micro Tech. XWL-11GRTX Manual Do Utilizador

Subnet Mask

Fill in the subnet mask of LAN interfaces of this

WLAN Access Point.

Default Gateway

Fill in the default gateway for LAN interfaces out

going data packets.

DHCP

Click to select Disabled, Client or Server in

different operation mode of wireless Access Point.

DHCP Client Range Fill in the start IP address and end IP address to

allocate a range of IP addresses; client with DHCP

function set will be assigned an IP address from the

range.

Show Client

Click to open the Active DHCP Client Table window

that shows the active clients with their assigned IP

address, MAC address and time expired

information. [Server mode only]

DNS Server

Manual setup DNS server IP address.

Domain Name

Assign Domain Name and dispatch to DHCP clients.

It is optional field.

802.1d Spanning

Tree

Select to enable or disable the IEEE 802.1d

Spanning Tree function from pull-down menu.

Clone MAC Address Fill in the MAC address that is the MAC address to

be cloned. Refer to 4.24 What is Clone MAC

Address?

Apply Changes

Click the Apply Changes button to complete the

new configuration setting.

Reset

Click the Reset button to abort change and recover

the previous configuration setting.

3.3.11 WAN Interface Setup

This page is used to configure the parameters for wide area network that

connects to the WAN port of your X-Micro WLAN 11g Broadband Router.

Here you may change the access method to Static IP, DHCP, PPPoE

or PPTP by click the item value of WAN Access Type.