EnGenius Technologies ECB-1220R Manual Do Utilizador

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater         

 

          Version 1.1 

 

 

 40 

 

ƒ  WPA Authentication Mode: Select the Personal (Pre-Shared Key) radio button.  

ƒ  WPA/WPA2: Select TKIP or AES as the cipher suite.  

ƒ  Pre-Shared Key Format: Select Passphrase from the drop-down list.  

ƒ  Pre-Shared Key: Enter the pass phrase here; this should be between 8 and 63 

characters.  

ƒ  Click on the Apply Changes button to confirm the changes. This device will 

automatically restart once these changes have been applied.  

 

ƒ  Encryption: Select WPA or WPA2 from the drop-down list if your wireless network 

uses this encryption. WPA (Wi-Fi Protected Access) was designed to improve upon 

the security features of WEP (Wired Equivalent Privacy). The technology is designed 

to work with existing Wi-Fi products that have been enabled with WEP. WPA 

provides improved data encryption through the Temporal Integrity Protocol (TKIP), 

which scrambles the keys using a hashing algorithm and by adding an integrity 

checking feature which makes sure that keys haven’t been tampered with.  

ƒ  WPA Authentication Mode: Select the Enterprise (RADIUS) radio button.  

ƒ  WPA/WPA2: Select TKIP or AES as the cipher suite.  

ƒ  RADIUS Port: Enter the port number of the RADIUS server. The default is usually 

1812. 

ƒ  RADIUS IP Address: Enter the IP address of the RADIUS server.  

ƒ  RADIUS Password: Enter the shared password of the RADIUS server.  

ƒ  Click on the Apply Changes button to confirm the changes. This device will 

automatically restart once these changes have been applied.  

 

 

•  Wireless Distribution System uses wireless media to communicate with other APs, like 

the Ethernet does. To do this, you must set these APs in the same channel and set MAC 

address of other APs which you want to communicate with in the table and then enable 

the WDS.