Huawei MC509 Manual Do Utilizador

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification

SMS Interface Commands

Issue 01 (2011-08-26)

Huawei Proprietary and Confidential

105

1: CPT (not supported at present)

2: voice mail (not supported at present)

3: SMS report

<stat>: Specifies the type of a short message. The values are as follows:

0: received unread short messages

1: received read short messages

2: stored unsent short messages

3: stored sent short messages

4: all short messages(only useful in ^HCMGL command)

<Msg>: The received short message.

<ctrl-Z>: Indicates the end of the content of a short message. The character is '0x1A'
when the encoding format is not UNICODE encoding; the character is '0x001A' when
the encoding format is UNICODE encoding.

8.15 +CMGD–Command for Deleting a Short Message

8.15.1 Syntax

Command

Possible Response(s)

+CMGD=<index>

[,<delflag>]

In case of an SMS-related error:

<CR><LF>+CMS ERROR:<err><CR><LF>

+CMGD=?

<CR><LF>+CMGD:(supported <index> list)[,(supported
<delflag> list)]<CR><LF>

8.15.2 Interface Description

The execution command deletes the short messages in the <index> position of the
storage medium specified by <mem1>. For the setting and description of <mem1>,
see the +CPMS command. If the second parameter <delflag> is provided, and the
value is not 0, the MT ignores <index> and performs operations based on <delflag>.

The current storage position of short messages and the supported <delflag> values
are returned when the test command is executed.

8.15.3 Parameter Description

<index>: Identifies the storage position of a short message.

<delflag>: