Adtran L128 Manual Do Utilizador

Página de 200
 
Quick Startup Guide
 
61202.070L1-1
Express L128/L128T User Manual
 
3
 
19. If the call is successful, the 
 
Status
 
 column will read 
 
active
 
. If not, make 
sure the number(s) are correct or reference 
 
Chapter 4
 
 on page 107 (the trou-
bleshooting chapter) before going on to the next step.
20. Once the call is up, the PC must generate a DHCP request to obtain the IP 
parameters needed to get on the Internet. Refer to your PC’s user manual 
or help screen.
 
MULTIPROTOCOL ROUTING BETWEEN TWO LANS
Remote/Home Office Accessing the Corporate LAN
 
The following steps can be used to set up the Express L128/L128T on a remote 
LAN to access a corporate or central LAN using demand dial and dynamic 
bandwidth management.
1.
Connect the 10BaseT cable from the hub to the Express L128/L128T.  Se-
lect 
 
TO HUB
 
 on the Express L128/L128T back panel. The 
 
LI
 
 indicator 
should be illuminated.
2.
Set the
 
 IP address
 
 and 
 
Subnet Mask
 
 assigned by the network administra-
tor in the 
 
Configuration/IP
 
 menu.  
3.
For the 
 
Default Gateway
 
,
 
 
 
enter the IP address of the access server at the 
remote site.  This creates a default route in the IP routing table that will be 
used with the dial-on-demand feature in the Express L128/L128T.
4.
Use the arrow keys to get to the 
 
Configuration/IPX
 
 menu.  Set the 
 
Net-
work value
 
 to the IPX network supplied by the network administrator.  
Set the 
 
Seed Status
 
 to 
 
Seed
 
.  Arrow left and save the changes with a 
 
y
 
 
when prompted.
5.
Move to the 
 
Configuration/Connection List
 
.  Use the arrow keys to move 
the cursor over the 
 
Num
 column. Type to insert a new entry.
6.
Move the cursor over the Description field and press Enter. A pop up 
window appears in which to enter a name for this Connection List profile.
7.
Move the cursor over the Authentication menu and press Return.  This 
will place the authentication parameters into the right pane.
8.
Enter the username and password under Tx Username and Tx Password.  
These items should be provided by the administrator at the site being 
dialed.
9.
Use the down arrow to display the IP menu parameters in the right pane.
10. Move the cursor over the Route menu and press Return.